How to Replace Trekking Pole Sections on LT5 Poles
By Gossamer Gear | take less. do more. | Published: 2026-10-15
Category: How-to Guides
Learn how to replace a damaged section on your LT5 trekking poles with our step-by-step guide. Fix your poles and get back on the trail.
Quick answer
To replace a section on your LT5 trekking poles, first identify the damaged section, then order the correct LT5 Replacement Sections. When they arrive, disassemble the pole by removing the grip or tip as needed, swap in the new section, and reassemble. Always check that the pole locks securely and functions properly before heading out.
Why replace a section instead of the whole pole?
Trekking poles can break if you step on them, drop a rock on them, or accidentally run them over. Instead of buying a new pair, you can often replace just the damaged section. This saves money and reduces waste. The LT5 Three Piece Carbon Trekking Poles are designed with replaceable sections, so you can keep using your favorite poles with minimal cost and effort.
Tools and parts you'll need
Before you start, gather the necessary tools and parts. You'll need the replacement section for your LT5 poles, which you can find as LT5 Replacement Sections. A rubber mallet or a block of wood and a hammer can help with stubborn connections. A clean cloth for wiping down parts is also useful. No specialized tools are required for most replacements.
Step-by-step replacement process
Follow these steps carefully to replace the damaged section without causing further issues.
Tips for a smooth repair
Work on a clean, well-lit surface so you don't lose small parts. Take photos as you disassemble if you're unsure about reassembly. If a connection is stuck, don't force it; apply gentle heat from a hair dryer to loosen any adhesive or friction fit. Always test the pole after reassembly by adjusting it and applying weight to ensure it holds.
When to consider professional repair or replacement
If the damage extends beyond a single section, such as a broken locking mechanism or a cracked grip, it might be more practical to replace the entire pole. However, for a simple broken section, DIY replacement is straightforward and cost-effective. If you're unsure, contact our customer service for guidance.
Step-by-step replacement process
- Identify the damaged section: Extend your poles fully and inspect each section for cracks, bends, or breaks. The damaged section is usually the one that won't lock or is visibly compromised. Checkpoint: Mark the damaged section with tape so you remember which one to replace.
- Order the correct replacement section: Purchase LT5 Replacement Sections from our store. Make sure you select the right section (upper, middle, or lower) based on your pole model. Common mistake: Ordering the wrong size or type; double-check your pole model and section length.
- Disassemble the pole: Remove the grip or tip if necessary to access the damaged section. Some sections may be glued or friction-fitted; twist and pull firmly. If stuck, use a rubber mallet to gently tap the section loose. Checkpoint: Keep all parts organized; take a photo before disassembly if unsure.
- Remove the damaged section: Once loose, slide the damaged section out. Clean the inside of the remaining sections with a dry cloth to remove dirt or debris. Common mistake: Forcing the section out and damaging the locking mechanism.
- Insert the new section: Slide the new section into place, ensuring it aligns with the locking mechanism. Push until it seats fully. Reattach the grip or tip if you removed them. Checkpoint: Test the lock by extending the pole and applying weight; it should hold securely.
- Test and adjust: Extend the pole fully and lock each section. Apply body weight to ensure it doesn't slip. Adjust the length as needed for your height. Common mistake: Not testing the lock; a loose section can collapse mid-hike.
Product facts
- LT5 Replacement Sections: Replacement Sections for your LT5 Trekking Poles. Lightrek trekking poles are tough - but not indestructible. Should you happen to stomp on yours, drop a large rock on it, or drive your SUV over it we offer replacement sections and parts. You can fix your poles instead of buying new ones, saving money and reducing waste.
- LT5 Three Piece Carbon Trekking Poles (pair): At just 4.9 oz per pole, the LT5s are among the lightest 3-piece trekking poles on the planet. Designed for ultralight hikers, minimalist travelers, and anyone tired of lugging around heavy gear. These poles are lightweight and durable, but if a section breaks, replacement keeps them going.
- Tenacious Repair Tape: Tenacious Tape is ideal for fast in the field repairs on backpacks, bug mesh and more. Instantly seals leaking seams, tears and pinholes, stops rips from spreading and acts as an abrasion-resistant shield on high-wear areas. Works on many fabric types including no-see-um bug mesh, however it is NOT recommended for use on silicone coated fabrics, for that use Gear Aid Sil Net. While not for trekking poles, this tape is handy for repairing other gear like stuff sacks or tents.
